Customers of EmailToVoice.Net send alert phone calls or text messages to their employees. Sometimes, those employees leave the company or go on vacation. In these cases, the messages should be stopped permanently or temporarily. The most preferred method to stop calls from going to a specific phone number is to remove them from all lists. But, adding their number to the Opt Out List may be faster and more efficient.
The most expedient way to stop messages from being sent is to add the phone number to the account’s Opt Out List. The administrator can even set a time period.
Opt Out List
The Opt Out List is managed through the Customer Portal.
The administrator is provided with a list of message types on the OptOut Lists Management page. The choice should be made based upon what type of messages were being sent. The following can be used as a reference:
Choose Phone if the message was sent to PhoneNumber@tts.message-service.org
Choose Mobile if the message was sent to PhoneNumber@sms.message-service.org or PhoneNumber@linkinsms.message-service.org
Chose FAX if the message was sent to PhoneNumber@fax.message-service.org
The OptOut List will work if you are sending messages individually or if you are using the different methods available in EmailToVoice.Net for multiple destinations. There are many ways to send to multiple users in a single message.
Multiple destinations can be specified in the TO field by separating them with a “#”. IE;:
2145551234#2145551235#2145551236@tts.message-service.org
OR, multiple destinations can be entered as multiple full email addresses:
“2145551234@tts.message-service.org, 2145551235@tts.message-service.org”
NOTE: When stringing destinations in the TO field of the Email, there is a standard general length restriction of about 64 characters for the TO field.
Multiple Destinations in the Email Content
Multiple Destinations can be In the body of the message in the following format:
<Numbers>
2145551234
2145551235
2145551236
</Numbers>
NOTE: The destination phone numbers are included in the body of the message. So, the TO field should be: msg@tts.message-service.org
Multiple Destinations Using a Pre-Loaded List
Multiple Destinations can be through pre-setup lists by using the format:
<Lists>
My First List Name
My Second List Name
</Lists>
We convert your email content to voice so the recipient of your choice receives an easy-to-understand voice message on their phone – plus many more valuable features. We do not require that the receiving phone number be registered with us. You can send a phone call from your email to any landline or cell phone. No software to install. No expensive complicated Apps. Nothing new to learn.
Send Rich content SMS messages from any email interface
EmailToVoice.Net provides the ability to send a large amount of formatted data (16MB) using LinkInSMS to a cell phone as an SMS from monitoring software or business applications. Messages with the formatting requirements of an HTML Web Page can be automatically sent to just about any cell phone in the world as easily as sending an email using simple SMS, which is available everywhere in the world.
Escalation Call Lists are needed when an emergency alert must be received and acted upon. EmailToVoice.Net provides the customer the ability to create a list of recipients that will be called sequentially until a person is reached and listens to the alert message.
We have added an additional feature to our Escalation List. The customer can now set a default amount of time that occurs between the sequential calls. The customer signs into the Customer Portal and goes to MY Details. The field is called ‘Escalation List Delay’. This field sets the time between each call that was not answered in an escalation list. The setting is the delay duration in minutes.
List Management
EmailToVoice.Net has long provided List Management so that a customer can send a message to multiple recipients, such as an email to a voice phone call. This is done in the Customer Portal under the menu item Manage Personal Lists.
Escalation Lists are a feature of the List Management capability in EmailToVoice.Net.
Escalation Lists are used to sequentially send a text-to-speech (TTS) message to a list of phone recipients. The messages are sent one at a time until a person answers or takes an action to accept the call. The acceptance of the call is based upon specific criteria set by the administrator that created the list. This is unlike the standard list type, where the message is sent to all the recipients at one time.
The purpose of an escalation list is to find a recipient who can act on the message. Examples of such a message might be:
Perform an urgent maintenance job for a piece of equipment that has failed
Fill a shift vacancy for someone who has called in sick
Get a courier to urgently pick up a package and deliver it
Send a Message to an Escalation List
You send your TTS message using this list in EmailToVoice.Net. For example,
send the email message TO dmy@tts.message-service.org
in the body of your message, include:
<Lists>*My New Escalation List Name*</Lists> (* * replace with your list name)
The message must be picked up (not by voice mail) and listened to for at least 10 seconds, otherwise, the next recipient in the list is called. Once someone listens to the message for the required length of time, the job stops there.
If you send a two-way TTS, the recipient must press 1 on the phone’s Dialpad to accept the message. Otherwise, the next recipient in the list is called. In this case, it doesn’t matter how long the person has listened to the message. Making a TTS message a Two Way is done by merely adding the tag <TwoWay> on a separate line in the content of the email.
More Features
EmailToVoice.Net is rich in features while being simple and effective to use for business communications and alerts. We transform an email message into a phone call or enterprise Text Message with no need to program APIs or install any hardware or software. You can send a voice phone call (TTS), Enterprise Text SMS, FAX or prerecorded Voice Message from any email program interface through your monitoring software, CRM, or Dispatch System. Contact Us and let us assist you in meeting your mission-critical business communications needs.
Author
Director at EmailToVoice.Net: CISSP – Solutions Architect for Industrial IoT Alerts and Business Communications. LinkedIn
People pay more attention to voice calls these days than email. A phone ringing gets the attention of the person that needs to be alerted in an emergency. The reason is that email and other forms of text messaging have swamped us to the point we do not pay attention to them, anymore. A phone ringing still makes people pay attention. They are loud and rare.
In a phone call, there’s a chance the person on the other end of the line might have an opinion.
An alert phone call is not a conversation. It is the delivery of critically important information. A phone call with a voice message is the perfect delivery method for time-sensitive critical information.
Critical Alerts from Applications
Implementing critical alerts delivered from business applications is a major effort. Sending a message from monitoring software or directly from an IoT device to a phone requires specialized hardware and software solutions to be installed in the client’s central data center. Connections to smart devices, CRM, PCS or ERP systems need to go through complex API’s or propriety software gateways
However, a cloud-based communications solution such as EmailToVoice.Net makes this all as easy as sending an email. The EmailToVoice.Net service does the hard stuff. It converts the text of the email message into a genuine-sounding voice (Text to Speech), then dials the phone, handles voice mail, and much more. All of this is done without the need to install hardware or use APIs. There are not even any monthly fees.
How EmailToVoice.Net Works
All you have to do is subscribe to the EmailToVoice.Net service and then make the TO field in the Email look something like 5551234567@tts.message-service.org
The recipient will receive a call on their phone. The text in the email is converted to a nice-sounding voice. If the recipient answers, they will hear the message right away. If they do not answer, the message will be left on their voice mail system. You can even leave a different message if the call goes to voice mail! There are many mission-critical features in the service.
Industrial IoT Needs To Send Alerts
An IoT device is any device connected to the Internet. In an enterprise environment, monitoring these devices is commonly done through Monitoring Software, like viewLINC, or SolarWinds to name just a couple – there are many.
These IoT devices need to communicate with people through alerts and integration with mission-critical applications. The Industrial Internet of Things (IIoT) needs to be given a voice. An IIoT device that has only the ability to send an email must now be enabled to dial a phone. The number may be repair truck or used to wake people in the middle of the night or cut through all the mundane communications received during the regular business day.
Since people are not making phone calls as much as they used to, the voice phone call now becomes the perfect way to deliver a critical alert to an individual.
Supply Chains Require Communications
Supply Chain communication is critical to the success of the Supply chain and its stakeholders. The importance of effective communications for internal stakeholders and external suppliers cannot be overstated. An enterprise must have a well-planned communication strategy to ensure the resilience of the Supply Chain.
As part of a Supply Chain communication plan, multiple channels and methods should be taken into consideration,. An alternative communication channel is a voice phone call. This is an effective communication channel in regular Supply Chain processes because phone calls get the participant’s attention. Supply Chain Communications is critical to the resilience of critical processes. Using multiple channels during the process is imperative to success.
The fact that Phone calls are rare has made them an excellent communication channel to convey important information and emergency alerts. We are inundated with text communications coming from SMS, Email, and a multitude of chat Instant Messaging platforms. To cut through all of that noise with an important alert, a loud and reliable channel needs to be used. That channel is the common voice phone call.
How to send an Alert to a Phone
EmailToVoice.Net provides the ability to make a phone call using any email interface. This can be tested using a personal email mailbox. However, the production use of this capability is by utilizing the email messaging capability within the monitoring software or business application.
How to Use EmailToVoice.Net
First, a user should subscribe to EmailToVoice.net. A free trial is available.
FROM Field
The Email must be sent from the same Email address as was specified during the free trial subscription process. A Send-Only Email address can be added later for the production implementation.
TO Field
The TO field should specify the phone number to be dialed.
The TO field would look something like 2145551783@tts.message-service.org. (if the number is not a USA or Canadian number, then the TO field would look something like +6155551243@tts.message-service.org)
The number can be any phone number in the world, with some exceptions due to international regulations, and does not have to be preregistered.
SUBJECT Field
The SUBJECT field can be anything brief. It is used for reporting. Optionally, the Subject field can also be made part of the voice message.
Content of Email
The content of the Email is converted to a pleasant sounding American English voice. (Leave at least 4 lines after the content of the email and before the email signature, so the Email signature is not converted to voice.) There are additional dialects to accommodate other languages or accents.
Send the Email
That’s it. The EmalToVoice.net service will dial the number, play the voice rendition of the email content, handle voicemail, etc.
Advanced Features
There are many advanced features of EmailToVoice.Net. Those features will be covered in future posts. So, subscribe to our blog and stay updated. We also provide some very useful information in our Blog regarding Industrial Internet of Things, Monitoring Software, and much more.
You have become a user of EmailToVoice.Net. So, now what?
First Things First
Let’s make sure we all understand the basics of how EmailToVoice.Net works. Our cloud messaging service converts the text in the email message to a genuine-sounding voice or formatted SMS text message and then delivers that message to a phone anywhere in the world without preregistrations. No need to install hardware or use APIs.
To send a message, the Email Fields would look something like this:
TO: phonenumber@NNN.message-service.org (The recipient’s cell phone, NNN can be TTS, SMS, LinkInSMS, Voice or FAX)
FROM: emailaddress@yourcompanydomain.com (The authorized email address to send messages through our service)
SUBJECT: Anything (Used as a job name for reporting purposes, but can be used as the message or part of the message)
CONTENT (For TTS, this will be converted to a voice message. For SMS, this becomes the text message)
Those are the fundamentals. So, now let’s cover what more we can do to meet your enterprise business needs. (Note that this is not an inclusive list. These are the most commonly used advanced features.)
Send a Voice or SMS message from Monitoring Software, CRM, ERP, PCS, or any business application
Integrating communications with business applications is the most common use of EmailToVoice.Net. Applications can send an email, but it is so important in today’s sensory-filled world to get the important messages out as a voice phone call or an SMS text message. Merely change the recipient’s email address to the format of the TO as described above, and you are now sending live communications from your applications without the need for APIs, coding, etc.
What Email Addresses are Authorized?
The main email address specified during the Subscription process on the account can always send messages through our service. That email address also receives reports, password changes, and billing:
You can request us to add an additional email address to your account that will be authorized to only send messages through our service. Just Contact Us.
There are many security features to identify items such as a whitelist of IP addresses. Let us know what you need.
What Phone Numbers Can I Send To?
You can send messages to any number in the world. If the number is in the USA or Canada, then the country code is not needed. When the number is outside of the USA and Canada, then specify phonenumber in the TO field to be something like +6155555555, where 61 is the country code. (Note that there are some global regulations that may exclude some phone numbers.)
Can I Have Only Part of the Message Converted to Voice or SMS?
You can parse the email message by specifying where the important part of the text starts and ends. This eliminates the irrelevant parts of your email, such as the top Header part, and the bottom of the email, such as the Signature, leaving only the important part of the message. Set these parameters in the Customer Portal / My Details / Change Details. It is great to keep the message short and more succinct.
Can I Set a Window of Time for Delivering the Messages?
If you want to send alerts out to your staff as phone calls or SMS text messages only during a specific time of day, you can specify the times in Customer Portal / My Details / Change Details / Email To Broadcast: Active Window.
Can I have the Sending Number be From My Company?
You can have the Caller ID for TTS and Voice messages be from a number that you own. Just Contact Us. It is important that you are able to provide proof that your company owns the phone number. We cannot guarantee that the Caller ID will display in all regions of the USA and globally because carriers throughout the US and the world have to meet varying regulations regarding Caller ID.
You can specify an SMS Sender ID number in Customer Portal / My Details / Change Details. If you are not in the USA and Canada, you can specify a number you own. Within the USA and Canada, you will need to request a number (a Long Code) from us and we will update your account with that number. There will be a minimal monthly charge for that Long Code.
Can I Send to Multiple Destinations?
There are several ways to send to more than one destination.
Multiple Destinations in the TO Field
Multiple destinations can be specified in the TO field by separating them with a “#”. IE;:
2145551234#2145551235#2145551236@tts.message-service.org
OR, multiple destinations can be entered as multiple full email addresses:
“2145551234@tts.message-service.org, 2145551235@tts.message-service.org”
NOTE: When stringing destinations in the TO field of the Email, there is a standard general length restriction of about 64 characters for the TO field.
NOTE: The type of messages, such as TTS or SMS, cannot be mixed in a single message.
Multiple Destinations in the Email Content
Multiple Destinations can be In the body of the message in the following format:
<Numbers>
2145551234
2145551235
2145551236
</Numbers>
NOTE: The destination phone numbers are included in the body of the message. So, the TO field should be: msg@tts.message-service.org
Multiple Destinations Using a Pre-Loaded List
Multiple Destinations can be through pre-setup lists by using the format:
<Lists>
First ListName
Second ListName
</Lists>
NOTE: These lists are created and loaded through the Customer Portal
NOTE: The TO field should be: msg@tts.message-service.org
Can I Have the Subject Field be Part of the Message?
The Subject field of the email coming into our service is always used as the Job Name for reporting purposes. However, sometimes the Subject Field has valuable information in it. So, you can choose to concatenate the Subject field to the message or have only the Subject field be the entire message. You specify this in Customer Portal / My Details / Change Details.
Can I have an SMS Message Deliver Large Amounts of Formatted Data?
An Aert text message sometimes needs to deliver a large amount of formatted data (HTML). This can be done by sending the SMS message with the TO field as phonenumber@LinkInSMS.message-service.org. For instance, the formatted data may be the section of a user manual on how to perform the repair for the failed device. Our ‘Enterprise SMS’ feature, which uses LinkInSMS, is explained in more detail in our post called “Sending Enterprise Text Using a Simple Email Interface “.
How Does Reporting Work?
Every time a message is sent from your account through our service, the main email address receives a detailed email providing the status of the message. This can be changed in your account so that the main email address receives messages only if there are exceptions, such as a failed job. Just Contact Us.
You can specify additional emails to receive reports, or specify that no email reports are sent at all.
Is There A Customer Portal To View Job History?
We have mentioned the Customer Portal previously regarding Account Details and Lists. However, it has much more, such as ‘View All Jobs’ to see the jobs history on any date range you choose.
In Summary
There are many advanced features of EmailToVoice.Net. These are merely a few of them. We love to share our many years of experience in this industry and provide easy no-code solutions for your workflow communications needs. Do not hesitate to Contact Us.
EmailToVoice.Net provides the user with the ability to set a window of time for the delivery of voice phone calls and SMS messages using any email interface.
This feature is extremely useful for departments that need their staff to be alerted by voice or SMS when they are off their primary working hours. When staff are at their desks, they may not need voice and SMS alerts. However, when the staff is not on their primary shifts, the messages must get the attention of the staff members. To get that attention, the messages should be delivered as a telephone call and/or SMS text message. Email is not an effective way to get the attention of essential support staff.
We created a user option so an active window of time can be designated for voice phone calls or SMS text messages to be delivered by EmailToVoice.Net.
Although setting a window of time for voice or SMS messages to be delivered can be accomplished by using no-code alternatives like Microsoft Power Automate, we provide this ability without the need for any third-party capability. The customer merely needs to sign-in to the Customer Portal and modify these parameters in the ‘My Details’ section.
Easily configure your delivery start time and end time
The parameters in Customer Portal / My Details provide the ability to block or allow the messages to go through. The parameters allow the user to set different rules for the Weekend (Saturday and Sunday) and the Weekdays (Monday through Friday). The time can either be blocked or allowed. The time is according to the timezone set in the account under My Details.
If you have any questions about this feature of EmailToVoice.Net, please contact us so we can help you meet your mission-critical business communications requirements.
We have recently added other features that assist our customers in adding workflow processes to their business communications needs. An example is designate the beginning and the end of a voice or text message sent using email. This is valuable when you want to send only the pertinent information in your alerts and mission-critical messages.
The customer can designate the beginning and end of all messages by logging into the Customer Portal and then going to My Details / Change My Details. The fields in the account details are
Email to Broadcast-Start of Message Text:
Email to Broadcast-End of Message Text:
How EmailtoVoice.Net works
EmailToVoice.Net is rich in features while being simple and effective to use for business communications and alerts. We transform an email message into a phone call or an SMS message with no need to program APIs or install any hardware or software.
For making a voice phone call, you merely make the TO field in the Email you are sending to look something like 5551234567@tts.message-service.org (international calls require a +CountryCode in front of the local number). The recipient will receive a call on their phone. The text in the email is converted to a nice-sounding voice. If the recipient answers, they will hear the message right away. If they do not answer, the message will be left on their voice mail system. You can even leave a different message if the call goes to voice mail.
You can also send an Enterprise SMS, FAX or prerecorded Voice Message from an email program interface, like from an application, Internet of Things device (IoT / M2M), or through your CRM and Dispatch System.
Contact Us if we can provide further assistance in helping you meet your business communications requirements.
